background image

MOON 320S Power Supply

 

 

Congratulations! 

 

Thank you for selecting the MOON 320S Power Supply as a part of your music system. This component has been designed 
to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on which 
Simaudio has made its reputation.  We have spared no effort to ensure that it is provides a significant improvement to the 
sonic performance of your MOON 310LP Phono Preamplifier. We have been building high-performance audio equipment 
for almost 30 years, and the know-how gained through our cumulative experience is an important reason why MOON audio 
components are so musically satisfying.  

 

The performance of your 320S will continue to improve during the first 200 hours of use.  This is the result of a “break-in” 
period required for the numerous high quality electronic parts used throughout this Power Supply. 

 
 

IMPORTANT ! 

Before setting up your new MOON 320S, there are mandatory internal adjustments 

that must be made to the 310LP Phono Preamplifier!    Failure to make the 
adjustments before connecting it to the 320S may result in damage that is not 

covered by warranty!   Refer to page 7 of this manual for instructions. 
 

 

We hope you enjoy using the MOON 320S Power Supply as much as the pride we have taken in creating this fine audio 
product.  We understand the power and emotion of music and build our products with the goal of faithfully capturing these 
elusive qualities. 

 

The information contained in this manual is subject to change without notice. The most current version 

of this manual is available on our official website at http://www.simaudio.com/manuals.htm

 

 

Unpacking 

 

The MOON 320S Power Supply should be removed from its box with care.   

 

The following accessories should be included inside the box with your Power Supply: 

 

9

    DC 4-pin XLR cable  

9

    This owner’s manual  

9

 

Warranty and product registration information  (USA and Canada only) 

 

As soon as the Power Supply is safely removed from its box and placed down, perform a thorough physical inspection and 
report any physical damage to your dealer immediately. We suggest that you keep all of the original packaging, storing it in a 
safe, dry place in the event that you’re required to transport this product. The customized packaging is specially designed to 
protect the MOON 320S  Power Supply from potential damage that may occur during shipping.

  

 

Please write the serial number of your new Simaudio MOON 320S in the space provided below for future reference. 

 

Serial No.: ________________ 

 

____________________________________________________________________________________ 

 

Congratulations  /  Unpacking   

 

 

 

 

 

 

                5

 

Summary of Contents for MOON 320S











Reviews: