Simatec simalube 125, User Manual & Technical Information, Page: 9 / 40

9
EN
G 1/4“
Ø
52 mm (2.05 in)
14 mm
(0.55 in)
43 mm (1.7 in)
simalube 30
G 1/4“
Ø
52 mm (2.05 in)
14 mm
(0.55 in)
62 mm (2.4 in)
simalube 60
G 1/4“
Ø
52 mm (2.05 in)
14 mm
(0.55 in)
100 mm (3.9 in)
simalube 125
G 1/4“
Ø
52 mm (2.05 in)
14 mm
(0.55 in)
193 mm (7
.6 in)
simalube 250
Product Specification
Product Automatic long-term grease and oil lubricator
Intended Purpose
simalube automatic lubricators are used on machines and devices
of all types. They may be mounted directly or with the aid of special
mounting accessories.
Power generation Hydrogen gas producing drycell
Working pressure Max. 5 bar
Adjustment Stepless 1–12 months (for standard conditions)
Dispensing rate See table on page 11
Operating
temperature –20 °C to +55 °C (–4 °F to +131 °F) ambient temperature
(Note: grease consistency changes with temperature)
Operation/Usage Grease dispenser can be installed in any position, even under
water. Attention: do not expose to direct heat.
Risks/Dangers
Despite careful design the possibility that skin comes into contact
with lubricant cannot be totally avoided. The lubricant should be
removed immediately with water and recommended solvent.
Certifications/
Approvals
II 1G Ex ia IIC T6 Ga
II 1D Ex ia IIIC T80 °C Da
I M1 Ex ia I Ma
Ingress protection IP68 (dust- and waterproof)
Usage period Activation within 2 years of production date
Stock temperature Recommended at 20 °C ±5 °C (65 °F ±5 °F)
30 ml 60 ml 125 ml 250 ml
Weight full ~82 g ~115 g ~190 g ~335 g
Weight empty ~55 g ~60 g ~75 g ~111 g