37. Water pump starts keeping sanitizing solution
re-circulating inside hydraulic circuit; let the unit
operating in sanitizing cycle for about 10
minutes
38. Push reset button for a while to restart rinsing
39. PC Board will start 7 rinsing batches as from #
32 to # 33
40. Meanwhile unit is within sanitizing cycle, mix in a
clean bucket some fresh water by 1 % of
Amuchina (sanitizer)
41. Open the Ice storage bin
42. Fill up by mixed solution at # 40 a spray bottle
then spray the same to all bin internal wall/area
43. With proper brush, wipe all over bin inside areas
44. Place back again the front panel
45. To restart the operation of the machine in
normal freezing cycle it is necessary to
push
and hold for 6-8 seconds the RESET
BUTTON
.
POWER
OPER.
BIN
FULL
ALARM
ALARM
HI
PRESS.
RE-SET
ATTENTION: throw away – do not eat first 2-3
batches of ice thus to be sure not chemical contains
remains inside stored ice