16. If necessary remove the spray bar and nozzles to
clean them separately then refit them.
17.
Set back the master switch to
ON.
The water pump
is again in operation to circulate the water and the
antibacterial solution in order to rinse the entire
water system .
18. After approx 10 minutes Switch
OFF
the unit and ….
19. …..fush out the rising water from the sump reservoir.
20. Rotate the Timer so that the microswitches reach
the beginning of the defrost cycle (low part of the
cam) then give power to the unit at master switch.
By doing so the water inlet valve is in this way the
incaming water fill up the water tank.
PAGE 5/6
