Adjusting the Push Ring Static Position
The Push Ring is adjustable inward and
outward. While you can adjust it out quite a
bit, you’ll generally want to adjust it so that
the very bottom of the ring just touches the
wheel when fully pressed.
Because the ring can only be mounted on the
very top (to accommodate different wheels),
it’s subject to some flex when you press the
very bottom of the ring. When pressed on the
sides or near the top, under normal
conditions, there will be little to no flex. This
flex also varies by the spring tension you use.
Just experiment to find the best position for
you.
To adjust, just loosen the two clamping
screws and then slide the ring assembly in or
out.
