Sima EUROTRON PLUS, Original User Manual, Page: 29 / 50

12
ENGLISH
10. SAFETY RECOMMENDATIONS & PREVENTION MEASURES
Do not operate the machine if anomalies that may affect the safety of persons.
• Keep safety signs clean installed on the machine and replace any that are missing.
• The maintenance, servicing and general repairs will be made only by authorized personnel.
• Observe all signs point to the work.
• Do not manipulate the safety devices under any circumstances.
• Ensure proper lighting for night work or in low light areas.
• Maintenance of the machine can be dangerous if not done according to manufacturer's specifications.
• Wear work clothes tight. Do not wear rings, bracelets, chains, etc.
• Cleaning and maintenance will be with the machine stopped with no possibility of movement or operation.
MIND YOUR STEP
• Keep work area clean of materials, tools, utensils, etc...
• Be careful to avoid twisting movements and wear appropriate footwear.
PROJECTION OF FRAGMENTS OR PARTICLES.
• Make sure nobody is in the range of the equipment or operating area of its working.
• Checkthe condition o f the equipment, holder tools, tools, accessories and whether they are adequate.
• Do not remove protective shields and other protective components installed.
ENTRAPMENT BY OR BETWEEN OBJECTS.
• Cleaning and maintenance will be with the team standing and unable to move.
• Make sure nobody is in the range of the equipment or operating area of its working.
• Grids and security protection that prevent contact with moving parts must be kept properly adjusted.
COLISSIONS AND CONTACTS AGAINST MOVING PARTS, MOTIONLESS, OBJECTS AND / OR TOOLS
• Pay attention to anything that is moving in your work area.
• Pay special attention to their movements.
• Be especially careful when traveling in work zones due to the narrowness and outgoing items.
• Store this equipment not used in the places allocated for this purpose.
• Use the tools in good condition and only for jobs that were designed (do not keep in your pockets).
• Do not store sharp tools with cutting edges uncovered.
• Cleaning and maintenance will be done with the machine stopped with no possibility of movement or operation.
• Make sure all grills; casings and protections of the moving parts are properly installed.
WARNING: Must follow all safety recommendations outlined in this manual and comply with regulations for
the prevention of occupational hazards in each place.
Manufacturer is not responsible for any consequences that may result in inappropriate use of the table
saw for wood.