Silvus StreamCaster 4000 Series User Manual Download Page 13

Page: 13 / 155

StreamCaster 4000 series MIMO Radio User Manual

9/2/20

10017C000

Silvus Technologies Confidential

Page

Figure 1 Product Symbols with Definition

•

Product cleaning should only be done with a soft cloth and mild detergent, do not use any solvents
that might remove case markings or labels.

•

The unit, at the end of its useful life is to be disposed in accordance with local regulations, or may
be returned to the manufacturer.

•

If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment and/or equipment performance may be impaired.

Summary of Contents for StreamCaster 4000 Series




























































































































































Search results

Summary of Contents for StreamCaster 4000 Series

Reviews:

Related manuals for StreamCaster 4000 Series

Brands by name

Popular brands

Silvus StreamCaster 4000 Series, User Manual

Search results

Summary of Contents for StreamCaster 4000 Series

Reviews:

Related manuals for StreamCaster 4000 Series

Brands by name

Popular brands