CI ICA I
SilverStone Strider Titanium
ST80F-TI
ST70F-TI
ST60F-TI
ATX12V / EPS 12V Switching Power Supply
With Active PFC
80Plus Titanium
PS/2
0
1.1 AC input requirements
The input voltage, current, and frequency requirements for continuous operation are stated below.
Table 1 AC Input Line Requirements
Power factor correction (PF)>0.90 at full load.
The power supply must meet inrush requirements for any rated AC voltage, during turn on at any phase
of AC voltage, during a single cycle AC dropout condition, during repetitive ON/OFF cycling of AC, and
over the specified temperature range (Top). The peak inrush current shall be less than the ratings of its
critical components (including input fuse, bulk rectifiers, and surge limiting device).
This specification describes the requirements of 600,700,800 Watts switching power supply with an stretch
ATX form-factor and EPS 12V, +5V standby voltage ,remote on/off control, full range line input capability
and forced air cooling characteristics.
1. AC INPUT
Parameter
Vin( Full range )
Vin Frequency
Iin(600W)
Iin(700W)
Iin(800W)
Min.
90
47
-
-
-
Nom.
100---240
60-----50
9-----4.5
10------5
11--- 5.5
Max.
264
63
-
-
-
Unit
VACrms
Hz
Arms
Arms
Arms
