![background image](http://html1.mh-extra.com/html/silverline/scv-1160-50-hv-hermod/scv-1160-50-hv-hermod_assembly-instructions-manual_1273246029.webp)
1.
Basic
The damper in the hood is from the factory is preset to
be able to close and open to min. and max. In some con-
structions, there is a legal requirement for a min suction of 72
m3 / h, which is why the damper cannot close completely.
This causes a slight buzz from the product, which is com-
pletely normal.
2.
Grease filter.
Remember to maintain the filters for optimized
suction and noise. The grease filters must be cleaned regu-
larly, otherwise they will result in a reduced power until they
are cleaned again.
In our quest for product improvements, JG Nordic - Silverline
reserves the right to change product specifications without notice.
n
JG Nordic - Silverline reserves the right to make printing errors
in this manual. Note that the user manual may be valid for sev-
eral models, therefore sections may be mentioned that do not
apply to your particular model.
14.1 Technical table
Supply voltage
220 - 240 V 50Hz
Insulation class for motor
F
Insulation class
CLASS I
Service, fault symptoms and solutions
Technical table
24.07.2020
29
Summary of Contents for SCV 1160-50 HV HERMOD
Page 5: ...2 Technical drawing 500 500 81 121 460 114 100 Fig 2 Technical drawing 24 07 2020 5...
Page 6: ...500 700 81 121 660 114 100 Fig 3 Technical drawing 24 07 2020 6...
Page 19: ...F g 14 Adjustment of a r flow 24 07 2020 19 Balanc ng d agram for forced vent lat on...
Page 21: ...F g 16 Adjustment of a r flow 24 07 2020 21 D mens on ng d agram for forced vent lat on...