manualshive.com logo in svg

Silverline Flow In Premium, Operating And Mounting Instructions Manual, Page: 60 / 69

Share
Download
Silverline Flow In Premium Operating And Mounting Instructions Manual Download Page 60

Flow In Premium

02/07/2018

60

Unpacking and assembling

Unpacking

22 

Unpacking and assembling

22.1  Unpacking

All parts of the extractor hood are shipped packed together in cardboard 

box.

WARNING!

Danger of suffocation if children play with the 

packaging material!

Children that play with the packaging material are 

in der danger of accidental suffocation.
–  Storage the packaging material out of the 

reach of children or persons that may no un-

derstand theses dangers.

1. 

Unpack the extractor hood and all further parts in-

cluded in the box and check the content for complete-

ness and whether everything is free from visible errors.

2. 

Check the engine function.

If you detect any damage, contact immediately your 

specialist retailer or the customer service depart-

ment ( 

Ä 

„Customer servicehotline (for Germany, 

Austria,Switzerland, France, Belgium, Netherlands 

and Luxembourg)” on page 3). In this case, the 

device must not be assembled.

Summary of Contents for Flow In Premium






































































Reviews:

No comments