www.silverlinetools.com
5
400W Trimmer Bump Feed
267213
Electrical Safety
The wires in this product are coloured:
Blue
Neutral
Brown
Live
Green & Yellow
Earth
•
This appliance must be protected by a suitable fuse
•
To prevent fire or shock hazard, do not expose this product to rain, water
or moisture
•
There are no user-serviceable parts inside except those referred to in
this manual
•
Always refer servicing to qualified service personnel. Never remove any
part of the casing unless qualified to do so; this unit contains dangerous
voltages
•
Use of a residual current device will reduce the risk of electric shock
NEVER CONNECT THE BROWN OR BLUE WIRE TO THE EARTH PIN OF A 13A
PLUG. IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN
Dangerous environment
•
Do not use power tools in damp or wet conditions, or expose them to
rain. Provide adequate surrounding work space and keep the area well
lit. Do not use power tools where there is a risk of explosion or fire from
combustible material, flammable liquids, flammable gases, or dust of
an explosive nature. When using power tools, avoid contact with any
earthed items such as pipes, radiators, cookers, refrigerators, metal
baths and taps
Protect yourself from vibration
•
Hand-held power tools may produce vibration. Vibration can cause
disease. Gloves may help to maintain good blood circulation in the
fingers. Hand-held tools should not be used for long periods without a
break
Maintain your power tool
•
Ensure all ventilation holes are kept clear at all times, otherwise
overheating and fire may occur
Always disconnect
•
Before changing fittings or accessories, always disconnect the tool from
the power source
Switch off before connecting
•
Ensure the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to
OFF
Do not abuse the power cable
•
Be sure the cable / extension cable is in good condition. Always have
a damaged cable / extension cable replaced at an authorised service
centre before using. Never pull the cable to disconnect it from the power
socket. Never carry the tool by its cable. Keep the cable away from damp,
heat, oil, solvents, and sharp edges
Do not modify the power tool
•
Do not modify the power tool in any way as this could result in serious
injury and may invalidate its guarantee
Do not leave the tool running unattended
•
Always wait until the tool has completely stopped functioning and has
been unplugged before leaving it unattended
Bump Feed Trimmer Safety
•
Before use, always check and clear the work area of hidden objects and
debris that may jam the trimmer
•
Dress appropriately and wear protective equipment, including gloves, eye
or face protection, and sturdy clothing
•
If the trimmer becomes jammed, switch off immediately. Unplug the
power supply before attempting to clear jammed objects
•
Do not use this product in wet conditions, and check grass is dry before
starting work
•
Ensure the power lead is kept away from the cutting area. Damage to the
power lead may cause an electric shock
Summary of Contents for 400W Trimmer Bump Feed 267213
Page 3: ...2 7 6 1 3 2 5 8 9 4...
