Page 18
7. Installation
Installation Advice
• Never reduce flue diameter right next to the
rangehood outlet fitting, refer to figure 1.
• Never fit reductions next to curves or bends
in the installations. They must always be in
straight sections and as far as possible from the
rangehood, refer to figure 2.
• Avoid exccessive reduction of the flue size, as
this drastically reduces extraction capacity,
refer to figure 3.
• Use an air extraction flue which is as short as
possible.
•
You should not have more than one blend in
the installation, refer to figure 4.
•
Keep the curves or bends to a minimum. If
they do exist, try to keep the angles as open as
possible, refer to figure 5.
Figure 1
Figure 3
Figure 4
Figure 2
Figure 5