Silvercrest USB-Traveller-KIT, User Manual

Page: 8 / 111

7
EN
Introduction and Getting Started
Cable-Winding Mechanism
The USB mouse, the numeric keypad, the headset, the USB extension cable, the modem connection
cable and the network cable have a smart cable-winding mechanism. By using this mechanism you can
have the connection cable at your required length.
To do this, pull gently on both ends of the cable at the same time until the required length is reached.
When you stop pulling, the winding mechanism pulls the cable from both sides in a little until it locks at
the next ratchet.
To wind the cable in, carefully pull on both ends again. The ratchet is released and the cable winds itself
back into the housing. To ensure that the cable winds up correctly when the cable is rolled off
completely, release the connector after the cable is wound up completely.
Pull the cable from both sides at the
same time to the desired length.
The mechanism will wind
the cable back slightly until
it locks in place.
Gently pull until it
unlocks and the cable
winds back in.
~ 1cm
~ 1cm