SilverCrest SWV 733 A2
78 - English
No wireless connection to the wireless router
The distance to the wireless router is too great, thus reduce it.
No LAN connection
Check whether the network cable is inserted correctly into the WAN/LAN socket (6) or LAN socket
(7) of the dual-band Wi-Fi range extender and into the LAN socket of your end device.
Connection with the WPS button fails (connection attempt to the wireless router)
Establish the connection with the WPS button again.
Reset the dual-band Wi-Fi range extender to its original condition. To do so, press the Reset button (5)
for approximately 3 seconds with a sharp object and then release it again. The LEDs then briefly go
out and this will reboot the dual-band Wi-Fi range extender. The dual-band Wi-Fi range extender
requires a certain amount of time (boot time) before it is ready to use. Wait for approximately 30
seconds before using the dual-band Wi-Fi range extender. Then establish the connection with the WPS
button again.
Eliminate sources of interference between the dual-band Wi-Fi range extender and the wireless router.
The distance between the dual-band Wi-Fi range extender and the wireless router is too great, thus
reduce it.
