SilverCrest SWV 733 A2
36 - English
Manual configuration
If you are not using the network default settings on your computer and have
manually set an IP address, you must restore the network settings to
Automatically
obtain an IP address.
For further details, please read the operating instructions
for your computer.
You must configure the dual-band Wi-Fi range extender via the network cable. To do so, you have to
connect the dual-band Wi-Fi range extender to your computer. Use the network cable included with the
device. Insert one end of the network cable into the WAN/LAN socket (6) or the LAN socket (7) of the
dual-band Wi-Fi range extender and the other end into the LAN socket of your computer.
Open the Internet browser on your computer. Enter
http://repeater.setup
in the address line of the
Internet browser and confirm the entry with the
Enter button.
The login window of the dual-band Wi-Fi range extender opens. Select the desired language and enter
the user name and password (factory default for both: admin). The connection to the dual-band Wi-Fi
range extender is established in an encrypted manner. If you want to establish an unencrypted
connection (not recommended), deselect
Security (Private SSL)
. Then click on the
Login
button. A
message may be displayed that the certificate might not be secure. Please accept the certificate as it is
from the manufacturer and is secure. The configuration menu of the dual-band Wi-Fi range extender now
opens.
