SilverCrest SWKH 2400 A1
10 - English
If you find visible damage on the kettle or the power cable
(6), switch off the kettle immediately, remove the plug from
the socket and contact the service department (see
‘Warranty information’ section).
Only plug the base (7) into a power socket that is properly
installed and easily accessible and whose mains voltage
corresponds with the rating plate specifications. Following
connection, the power socket must continue to be easily
accessible so that the plug can be quickly removed in an
emergency.
Never immerse the base (7) in water or any other liquid. If
liquid enters into the base (7), remove the plug from the
socket and contact the service department (see ‘Warranty
information’ section).
DANGER of fire
Fill the kettle (8) with a minimum of 0.5 litres of water. If you
do not pour in enough water, there is a risk of fire due to
overheating.
Keep the kettle at least 50 cm away from flammable and
combustible materials. There is a risk of fire.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and information
without the express written permission of the author is prohibited. This also concerns commercial use
of the content and data. The text and illustrations correspond to the technical standards at the time
of printing. Subject to alterations.
