GB
│
IE
│
NI
│
11
■
SWKD 2400 B2
Keep-warm function
The keep-warm function allows you to keep heated water at a specifi c tempera-
ture for an extended period of time. As soon as the water temperature in the jug
sinks below the set temperature, the appliance will automatically heat it to that
temperature again.
You can set the keep-warm function for temperatures between
40°C
and
90°C
in 5°C stages:
♦
When the appliance is activated, press the button
and use the arrow
keys to set the required temperature. The display indicator fl ashes
during the heating process, the
button and button light up.
♦
Once the set target temperature has been reached, you will hear a beep
and the display will stop fl ashing. The temperature is thus maintained at the
desired level.
NOTE
►
If the water is already as hot or hotter than the selected temperature on the
display , the signal will sound immediately. The set temperature will be
maintained.
►
The keep-warm function remains active for 2 hours. The appliance will then
switch off automatically.
►
If you remove the jug from the base while the keep-warm function is
activated, the keep-warm function will be cancelled. The display indicator
and all buttons go out.
♦
To switch the keep-warm function off manually, press the button
or the
button .
Overheating protection
If the appliance overheats, the overheat protection automatically switches off the
heating element inside the appliance. The overheating protection is activated if
the appliance is switched on while the jug contains no or not enough water.
If the heating element has been switched off by the overheating protection, allow
the appliance to cool down before using it.
IB_292034_SWKD2400B2_GB_IE_NI.indb 11
17.10.17 10:54
Summary of Contents for SWKD 2400 B2
Page 3: ......