8
SWC 300 C1
GB
Removing attachments
■
First switch the appliance off and allow it to cool down..
■
Pull the attachment from the attachment insertion slot
.
Switching on/off / Selecting a heat level
■
When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch
and select the output level:
–
“0” The appliance is switched off
–
“C” for a cold air stream (Cool Shot)
–
“1” for a warm air stream
–
“2” for a hot air stream
■
You switch the appliance off by sliding the level switch
to the position “0”
(= appliance off).
■
To fix the styling, you can move the level switch
to “C”. The styling will be
fixed by the cool air stream.
Styling
Select the desired attachment:
–
for long hair and large curls the large styling brush
.
–
for shorter hair or small curls the small styling brush
.
■
Wind the slightly damp strand of hair around the selected styling brush
/
.
■
Switch the appliance on at level 1 or 2.
■
When the strand is dry, slide the level switch
to “C”. Wait until the strand
has cooled.
■
Press the roll-out button
and simultaneously pull the appliance downwards
out of the strand. The styling brush
/
rotates with it, so that unwinding
the strand can be done easily.
■
Proceed with the other strands in the same way.
Summary of Contents for SWC 300 C1
