13
GB/IE/NI
Note:
By pressing the Clean button again on
the robot vacuum cleaner
11
or the remote con-
trol
27
, the product will return to the original
cleaning mode.
Corner mode
This mode is suitable for cleaning the corners and
edges of a room. In Corner mode, the product
follows a barrier (for example a wall).
During cleaning, press the Corner mode button
28
on the remote control to start this mode.
In this mode, the product will return to the
charging dock
2
after cleaning.
Note:
You can end Corner mode by pressing
the Clean button once on the robot vacuum
cleaner
11
or on the remote control
27
.
Note:
By pressing the Clean button again on
the robot vacuum cleaner
11
or the remote
control
27
, the product will return to the original
cleaning mode.
Time-delayed cleaning /
fixed time
Using this function, you can set a time period, after
which the product will begin cleaning. Smallest time
period: 15 minutes, largest time period: 23 hours
and 45 minutes.
Press the Clean button on the robot vacuum
cleaner
11
or on the remote control
27
(if no
notification is visible in the display
1
).
Press the Set schedule button on the robot vac-
uum cleaner
12
or the remote control
30
. The
last two digits in the display
1
will flash.
Using the Return mode
13
and Spot mode
14
buttons on the robot vacuum cleaner, set the
desired time in minutes (00, 15, 30, 45). To do
this, you can also use the directional buttons
26
on the remote control.
Press the Set schedule button on the robot vac-
uum cleaner
12
or on the remote control
30
again. The first two digits in the display
1
will
flash.
Using the Return mode
13
and Spot mode
14
buttons on the robot vacuum cleaner, set the
desired time in hours (01 - 23). To do this, you
can also use the directional buttons
26
on the
remote control.
Finally, press the Clean button on the robot
vacuum cleaner
11
or on the remote control
27
to confirm your selections.
After the set time has expired, the product will turn
itself on automatically and begin cleaning.
Note:
If you turn the product off using the power
switch
9
, the saved settings will be lost.
Cleaning and storage
Set the power switch
9
to position „
O
“ before
cleaning the product.
Unplug the mains lead
4
from the mains
socket before cleaning the product.
Do not rinse the product directly with water.
Do not wipe the product with a cloth soaked in
water.
Disconnect the power supply if the product will
not be used for an extended period.
Cleaning the dust collector
Open the product by pressing on the cover
10
where it says PUSH.
Remove the dust collector
21
and open it by
pushing the cover
22
upwards.
Remove the main filter
23
and empty the dust
collector
21
.
Fold the dust collector cover
22
forwards and
remove the filter frame
24
together with the
HEPA filter
5
from the outside of the dust
collector
21
.
Rinse the dust collector
21
under running water
or clean it using a damp cloth. Then wipe the
dust collector
21
until it is dry.
Clean the main filter
23
and the HEPA filter
5
with the cleaning brush
7
. Only reinstall the
filters when they are dry.
First, insert the HEPA filter
5
back into the filter
frame
24
, then insert into the dust collector
21
.
