SSP 2600 A1
GB
│
9
■
♦
During the charging process, the current charge
level of the power bank is shown via the charge
level LEDs
(see table in section "Checking the
charge level").
♦
To stop charging, disconnect the charging cable
!
from the mobile device and the power bank.
The charging status LEDs
go off after about
30 seconds.
Using the selfie stick
Before you use the selfie stick, you must first pair it with
your smartphone or compact camera via
Bluetooth
®
.
This pairing creates a link between your smartphone or
your compact camera and the selfie stick.
NOTE
►
Make sure that the battery of the power bank is
charged; otherwise the selfie stick will not work.
If necessary, charge the power bank battery
before using the selfie stick. Refer also to section
"Charging the power bank".
Connecting the selfie stick and smart-
phone/compact camera via
Bluetooth
®
♦
Turn on your smartphone or compact camera and
activate the
Bluetooth
®
function.
♦
Press and hold the On/Off button
for about
2 seconds to activate the
Bluetooth
®
function.
The
Bluetooth
®
LED
lights up for approx.
7 seconds and then flashes for one minute. The
charging status LEDs
light up and then go off
after about 30 seconds.
♦
Set the smartphone so that it scans for
Bluetooth
®
devices. You will find a detailed description of
how to do this in the operating instructions for your
smartphone.
♦
Select
SSP 2600 A1
from the list of found devices
on your smartphone to pair the two devices. The
Bluetooth
®
LED
stops flashing when pairing
is successful.
Summary of Contents for SSP 2600 A1
Page 3: ......
Page 57: ...SSP 2600 A1 54 SI ...
