GB
│
MT
│
43
■
SSM 600 B3
Operation
WARNING!
►
The motor switches off automatically as soon as the blender
3
is removed
from the motor block
6
or the lid
2
is opened . In such cases it may be
easy to forget that the machine is still switched on . The motor will then start
unexpectedly as soon as the blender attachment
3
is fitted or the lid
2
is
closed again:
Therefore:
–
Do not insert the power plug into the wall socket until the blender
3
is
filled and mounted with its lid fitted and closed .
–
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed .
–
Switch the appliance off first, pull the plug out and wait until the motor
has come to a standstill before removing the blender
3
or opening the
lid
2
.
Fitting and filling the blender
1) Rotate the blender
3
anticlockwise until the arrow
q
under the blender
handle is located above the
position . Remove the blender
3
from the
motor block
6
in a vertical, upward motion .
2) Remove the lid
2
by rotating it anticlockwise towards position
(see Fig 1)
until you can pull it upwards .
3) Fill the blender
3
.
4) Press the lid
2
firmly down onto the blender
3
. Close the lid
2
by turning
it clockwise to position until it audibly engages (see Fig . 2) . Ensure that the
pouring spout on the blender
3
is closed . The motor cannot start until the
lid
2
is fitted flush .
Fig . 1
Fig . 2
5) Press the measuring cap
1
into the lid as far as the stop .
Summary of Contents for SSM 600 B3
Page 3: ......
