GB
│
MT
│
51
■
SSM 600 B3
NOTE
You can also clean the upper plastic part
A
of the blender
3
and
the cutting blade
4
with the lower plastic part
C
in your dishwasher .
4) Dry all parts thoroughly before reassembling them .
5) Reattach the lower plastic part
C
of the blender
3
to the upper plastic part
A
of the blender
3
and turn it clockwise .
Cleaning the motor block
1) Use a dry or no more than slightly moistened cloth to clean the plastic
surfaces .
2) When cleaning, always check that the contact switch in the fitting for the
blender
3
is not blocked by soiling residues . If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services . Do not use any hard objects, these could damage the contact
switch .
3) Remove any possible residues on the underside of the motor block
6
with a
dry cloth or a stiffbristled brush only . Ensure that nothing can get in through
the ventilation openings of the appliance .
After cleaning
Allow all parts to dry well before reassembling and reusing the liquidiser .
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter “Cleaning”) .
2) Wrap the power cable around the cable retainer
7
on the base of the
motor block
6
.
3) Store the blender in a cool and dry location .
Summary of Contents for SSM 600 B3
Page 3: ......
