Silvercrest SRR 3.7 B2, Operating Instructions Manual

Page: 17 / 158

13 SRR 3.7 B2
GB
IE
Cleaning under running water
1) Press the release button
4
so that the cutting unit
2
pops open.
2) Overstretch the cutting unit
2
a little so it can be pulled upwards
and off .
3) Hold the cutting unit 2 under the running water so that the water
fl ows through the shaving heads from the inside to the outside.
CAUTION! MATERIAL DAMAGE!
Hold only the cutting unit
2
under running water! The shaver
handset can be damaged irreparably if it is held under running
water.
4) Allow the cutting unit
2
to dry.
5) Replace the cutting unit
2
on the shaver. Ensure that it snaps
into place and is seated fi rmly:
IB_108312_SRR3.7B2_LB3.indb 13 16.03.15 09:25