Silvercrest SRR 3.7 B2, Operating Instructions Manual

Page: 15 / 158

11 SRR 3.7 B2
GB
IE
Shaving with mains voltage
CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
If you want to use the shaver without previously charging it, you can
also use it directly with mains voltage:
1) Plug the connector
w
into the mains connection
0
on the shaver.
2) Plug the power plug
q
into a mains socket that complies with
the appliance specifi cations.
You can then use the shaver as described in the section “Cordless
shaving”.
Trimmer/long hair trimmer
To shape your beard, form sideburns or shave eyebrows, use the
long hair trimmer
3 .
1) To do this, push the catch
5
of the long hair trimmer
3
away
from it. The long hair trimmer
3
fl ips out.
2) Press the switch lock 7 and push the on/off switch 6 towards
the cutting unit
2
. The green power light
8
lights up and the
shaver starts the cutting unit
2
and the long hair trimmer
3
.
3) After you fi nish trimming, press the on/off switch 6 back to its
initial position.
4) Clean the long hair trimmer
3
with the supplied brush
e
. For a
more thorough cleaning, read the section “Cleaning and care”.
IB_108312_SRR3.7B2_LB3.indb 11 16.03.15 09:25