Silvercrest SRH 5 B2, Operating Instructions And Safety Instructions, Page: 60 / 260

GB
│
IE
│
57 ■
SRH 5 B2
Automatic switch-off (Sleep function)
You can use the sleep function to automatically switch the device off after
10–120 minutes .
♦ During ongoing operation, go to the System menu and press the TUNE+
8
or TUNE−
7
button (several times if necessary) or turn the VOLUME |
ENTER / SCAN dial
6
until Sleep appears on the display
1
.
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the selection .
♦ Press the TUNE+
8
or TUNE−
7
button several times or turn the
VOLUME | ENTER / SCAN dial
6
to select the switch-off time
(Off, 10, 15, 30, 45, 60, 90, 120 minutes) .
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the selection .
After exiting the system menu, S appears on the right of the display
1
followed by the remaining minutes or seconds .
♦ After the set time, the device will switch itself off automatically .
♦ To disable the Sleep function, select the setting Off as described above and
press the VOLUME | ENTER / SCAN dial 6 to confirm the selection .
Alarm
The device has two alarm functions, Alarm 1 and Alarm 2 , both of which can
be programmed to play the last radio station you listened to or a certain preset
(DAB+ or FM) or to play an alarm at a specific time on certain days .
Setting the alarm
♦ While in the System menu, press the
TUNE+ 8
or
TUNE− 7
button
(several times if necessary) or turn the VOLUME | ENTER / SCAN
dial
6
until Alarm appears on the display
1
.
♦ Press the TUNE+
8
or TUNE−
7
button or turn the VOLUME |
ENTER / SCAN
dial
6
to select Alarm 1 or Alarm 2 .
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the selection .
The display
1
shows the message Alarm (1/2) Setup .
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the selection .
The display 1 shows the message Alarm (1/2) On time and the hour
display flashes .
♦ Press the TUNE+
8
or TUNE−
7
button or turn the VOLUME |
ENTER / SCAN dial
6
to set the hours .
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the entry .
The minutes flash on the display
1
.
♦ Press the TUNE+
8
or TUNE−
7
button or turn the VOLUME |
ENTER / SCAN dial 6 to set the minutes .
♦ Press the VOLUME | ENTER / SCAN dial
6
to confirm the entry .
The display
1
shows the message Alarm (1/2) Duration and the minute
display flashes .