GB
│
IE
│
51
■
SRH 5 B2
Selecting stations
♦
Briefly press the
TUNE+
8
or
TUNE−
button
7
to select an FM radio
station from the station list .
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection .
Manual station scan
♦
Briefly press the
VOLUME
|
ENTER / SCAN
dial
6
to switch to
the next receivable station with a higher or lower frequency .
NOTE
►
The frequency of the station is shown on the display
1
and the speaker
9
is switched off during station scan .
Manual station selection
♦
Press the
TUNE+
8
or
TUNE−
7
button for about 2 seconds to change
the FM frequency in 0 .05 MHz increments . The current FM frequency is
shown on the display
1
.
Scan setting
The
Scan setting
function allows you to set whether all receivable FM radio
stations should be found during a scan or only radio stations with a strong
reception signal .
♦
In FM radio mode, press the
INFO / MENU
button
4
for approx .
2 seconds . The following appears on the display
Scan setting
.
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection .
♦
Press the
TUNE+
8
or
TUNE−
7
button or turn the
VOLUME
|
ENTER / SCAN
dial
6
to select
Strong stations only
or
All stations
.
♦
Press the
VOLUME
|
ENTER / SCAN
dial
6
to confirm the selection .
Saving your favourite stations
♦
To store the current radio station manually, press the
PRESET
button
5
for
approx . 2 seconds . The display
1
shows the preset with the last selected
radio station (if radio stations have already been stored) . If no radio stations
have yet been stored, the display
1
shows
Store preset 1: (Empty)
.
♦
Briefly press the
TUNE+
8
or
TUNE−
7
button (several times if necessary)
or turn the
VOLUME
|
ENTER / SCAN
dial
6
to select the desired
preset .
♦
Press the
VOLUME |
ENTER / SCAN
dial
6
to store the station in
the selected preset . The display
1
shows
Preset (1-40) stored
.
NOTE
►
Stored radio stations are overwritten if you store other stations in station
presets that are already occupied .