■
46
│
GB
│
IE
SRH 5 B2
Handling and operation
Switching the device on/off
NOTE
►
The DAB+ station list is automatically created or updated the first time
the device is switched on from standby mode using the button
2
. The
display
1
now shows the message
Scanning...
. Depending on the quality
of the DAB+ radio reception, this process can take up to several minutes .
►
When you switch on the device from standby mode with the button
2
,
the device will be in the last selected mode (DAB, FM,
Bluetooth
®
or
AUX IN) .
♦
Briefly press the button
2
to switch on the device . The device automati-
cally starts in DAB+ radio mode the first time it is switched on .
♦
Briefly press the
SOURCE
/
button
3
to switch between DAB+, FM
radio operation,
Bluetooth
®
or AUX IN mode .
♦
Press the button
2
again to switch off the device and put it into standby
mode .
Adjusting the volume
♦
Turn the
VOLUME
|
ENTER / SCAN
dial
6
clockwise to increase
the volume .
♦
Turn the
VOLUME
|
ENTER / SCAN
dial
6
anticlockwise to reduce
the volume .
NOTE
►
The display
1
shows the volume as a bar for a few seconds after pressing
the
VOLUME
|
ENTER / SCAN
dial
6
.
Radio operation
You can use the radio to receive DAB+ and FM radio stations . You can store up
to 40 preset DAB+ and FM radio stations each .
NOTE
►
When the device is first used, it starts in DAB+ radio mode and the station
list of the available DAB+ radio stations is created automatically .
The display
1
now shows the message
Scanning...
.