Silvercrest SRGF 1400 A1, Short Manual

Page: 10 / 120

SRGF 1400 A1 GB
│
IE
│
7 ■
Operation
WARNING! RISK OF INJURY!
► The appliance and the accessories become very hot during operation.
During operation, touch the appliance only on the temperature control
5
and the handles.
Raclette
ATTENTION! PROPERTY DAMAGE!
► Do not use metal utensils such as knives, forks, etc. when you remove food
from the griddle
3
or the pans
7
as they could damage the non-stick
coating. If the non-stick coating is damaged, stop using the appliance.
1) Lightly oil the griddle
3
and the pans
7
on the inside.
2) Turn the temperature control
5
to
MAX
. The operating light
4
lights up to
show that the appliance is heating up. Preheat the appliance for about 10
minutes.
NOTE
► The operating light
4
remains switched on until the set temperature level is
reached. It may switch on and off again and again, depending on the ambient
temperature and the cooking situation. This is not a malfunction. It merely
indicates that the appliance is heating up again to maintain the tempera-
ture. When the appliance is set to MAX, the operating light
4
remains on
constantly.
► Depending on the room temperature, heating up will start at different posi-
tions on the temperature control
5
.
3) Fill the pans
7
with the desired ingredients. Ensure that the pans
7
are not
overfilled otherwise the food could get too close to the heating elements and
could even touch them!
4) Place the pans
7
into the device. The slight recess
6
in the appliance helps
to keep the pans in place.
5) Turn the temperature control
5
towards
0
if you want to reduce the tempera-
ture. Turn the temperature control
5
towards
MAX
if you want to increase
the temperature again.
6) Remove the pans
7
from the device as soon as the contents are cooked.
WARNING! RISK OF INJURY!
► Apart from the insulated handles, the pans
7
are very hot! Therefore, hold
the pans
7
only by the handle!
IB_383201_SRGF1400A1_LB8-short.indb 7 19.08.2021 15:20:34