Silvercrest SPS 5000 A1, Operating Instructions Manual

Page: 13 / 90

SPS 5000 A1
■ 10
│
GB
│
IE
│
NI
Handling and use
Charging mobile devices with the power bank
♦ Insert the microUSB plug on the charging cable into the
microUSB charging port on the mobile device, and insert the
USB plug into the USB port on the power bank. The charging
process starts automatically.
♦ If charging does not start automatically, press the ON/OFF
button briefly to start the charging process.
NOTE
► Alternatively, you can also use the original charging cable (USB
cable) provided by the respective device manufacturer.
♦ During the charging process, the current charge level of the
power bank is shown via the charge level LEDs (see table in
the section
" Checking the charge level " ).
♦ To stop charging, disconnect the charging cable from the
mobile device and the power bank. The charging status LEDs
go out after about 20 seconds.
Using the power bank as a make-up mirror
The power bank has a normal mirror and a mirror with triple magni-
fication . There is also an optional LED light.
♦ Flip up the lid .
♦ Press the ON/OFF button for approx. 3 seconds to switch
LED light on or off.
♦ Close the lid .