Silvercrest SPMR 8000 B1, User Manual And Service Information

Page: 23 / 182

SilverCrest SPMR 8000 B1
English - 21
Voice-controlled send function (VOX)
This function is similar to the hands-free feature of your mobile phone. The PMR will start transmitting as
soon as it detects your voice (or any other noise). This allows you to send a message without pressing the
PTT button [12]. Using this function is not recommended when you are located in a noisy or windy
environment.

Press the Menu button [6] four times. The indication “VOX” and the current
VOX setting will flash on the display.

Press the Up

button [10] to enable the VOX function or to raise the VOX
sensitivity.

Press the Down

button [7] to reduce the VOX sensitivity or to disable the
VOX function (“OF”).

Press the PTT button [12] to confirm the setting.
Channel scan
Channel scan will search all available channels (1 to 8) for any active stations in a loop.
If an active channel is found, you can search for the CTCSS or DCS code that a station is using on the
channel.
Searching for an active channel

Press the Menu button [6] five times. The indication “SC” and the current
channel number will flash on the display.

Press the Up

[10] or Down

[7] button to launch the channel search.
The scan will stop automatically once an active channel has been found. Then you can listen to the
transmissions. Once the transmission on the active channel is terminated, the channel search continues.
Pressing the PTT button [12] while listening to a found channel, the handheld transceiver
will use that channel and return to idle mode.