Silvercrest SPMR 8000 B1, User Manual And Service Information

Page: 20 / 182

SilverCrest SPMR 8000 B1
18 - English
Setting a different channel
When setting a different channel, this needs to be done on both PMR sets for you to be able to
communicate with the remote station.

Press the Menu button [6] once. The current channel number will flash on
the display.

Press the Up

[10] or Down

[7] button to set a different channel.

Press the PTT button [12] to confirm the setting.
If no button is pressed for five seconds while changing a setting, the handheld transceiver
will return to idle mode and use the previously adjusted setting.
Reception
The handheld transceiver will be in receive mode as long as it is powered on and not transmitting (idle
mode).
Transmission

Keep the PTT button [12] pressed. The TX icon will appear on the display [1].

Speak into the microphone [9]. Hold the handheld transceiver vertically and
approx. 10 cm (4 inches) from your mouth.

Release the PTT button [12] when you are done with your message.