Silvercrest SPMR 8000 B1, User Manual And Service Information

Page: 17 / 182

SilverCrest SPMR 8000 B1
English - 15
WARNING:
Make sure that the wall outlet is nearby and easily accessible so that you can
unplug the power adapter quickly in case of an emergency. Otherwise a short
circuit or fire can occur.
The charging cradle’s power adapter consumes power even if there is no
handheld radio transceiver placed onto it. It is therefore recommended that you
unplug the power adapter from the wall outlet to completely separate it from the
mains and avoid any unnecessary power consumption.
Charging the batteries
Charge the battery packs of both handheld radio transceivers completely before
using them for the first time. Charging takes approx. 8 to 10 hours.
Place the handheld transceivers onto the charging cradle as
shown.
The charging indicator [28] located on top of the charging
cradle illuminates when a transceiver has been inserted
properly and its battery is being charged. Charging takes
approx. 8 to 10 hours. The charging indicator [28] is still
illuminated when the batteries are fully charged.
(The figure is
representational)
You can also charge a handheld transceiver without the cradle. To do so, insert
the power adapter plug into the power adapter socket [2] of the handheld
transceiver. To do this, open the rubber cover that protects the power adapter
socket [2].
The handheld transceivers cannot be used while they are charging.