Silvercrest SPDP 18 A1, Manual

Page: 40 / 165

■ 30
│
GB│IE
SPDP 18 A1
♦ Remove the four screws from the headrest bracket clamp using a
Phillips screwdriver .
♦ Place the clamp of the headrest bracket around the headrest
supports and tighten with the four screws .
NOTE
► Depending on the diameter of your headrest supports, use either
the pre-assembled screws or the supplied long fixing screws
6*
.
♦ Pass the securing strap
7#
through the brackets on the back of the
DVD player A .
♦ Now press the angle bracket into the holder of the clamp until it is
fully engaged . Check that the angle bracket and the DVD player
A
are fitted securely .
♦ Undo the side screw on the angle bracket and set the desired
inclination angle of the DVD player
A
.
♦ Secure the position by tightening the side screw again .