Silvercrest SPB 2.600 C1, User Manual And Service Information

Page: 13 / 84

SilverCrest SPB 2.600 C1
English - 11
Getting started
The power bank must never be charged and be
used to recharge an external device at the same
time.
Charging the power bank
Because of its high input current, never use a
notebook or PC to charge the power bank, only use
a suitable power adapter (5 V
, min.1A).
To charge the built-in battery of your power bank, use the
supplied USB charging cable (B) to connect the power bank to
a suitable USB power adapter (not supplied). To do so, insert
the Micro USB plug of the USB charging cable (B) into the
power bank Micro USB socket (7) and then connect the USB
plug to the USB port of the power adapter. During the
charging process, the LEDs (2, 3, 4, 5) inform you about the
current state of charge of the power bank.
LED indicator State of charge
One LED flashes 0 - 24%
One LED flashes, one LED on 25 - 49%
One LED flashes, two LEDs on 50 - 74%
One LED flashes, three LEDs on 75 - 99%
All LEDs on 100%