Silvercrest SNAW 1000 D2, Operating Instructions Manual

Page: 91 / 160

■ 88
│
GB
│
MT SNAW 1000 D2
WARNING
►
Empty batteries must be removed from the appliance and
disposed of safely.
►
Do not short-circuit the connectionterminals.
►
Rechargeable batteries must be removed from the appliance
before being charged.
First use
■ Remove all packaging materials from the appliance. Remove the protective
film from the display
3
. The transport restraint that prevents the weighing
platform
1
from being pushed down must be removed from under the
weighing platform
1
.
■ Open the battery compartment
2
on the underside of the scale and remove
the small plastic strip from between the batteries and the contacts, then close
the battery compartment
2
so that the battery compartment cover clicks into
place.
■ The scales can display weights in g (grams) and kg (kilograms) or in oz
(ounces) and lb (pounds). Press the
UNIT button
8
to change the weight
unit. The examples in these instructions always use the unit g (grams).
Setting up
Place the scales on a level, firm surface. Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet.
NOTE
► This appliance is provided with non-slip silicone feet. Furniture surfaces may
be made of a variety of materials and are treated with many different types
of cleaning agents. Therefore, it is not possible to entirely exclude the pos-
sibility that some of these materials contain substances that could corrode
and soften the appliance's silicone feet. If need be, place an anti-slip mat
under the silicone feet of the appliance.
IB_373080_SNAW1000D2_LB5.indb 88 23.07.2021 09:00:07