SilverCrest SMRS 35 A1
14 - English
Establishing the Wi-Fi connection via the "SilverCrest Smart-Audio" app
The following contains some important instructions for setting up your device. A detailed, up-to-date
description of the SilverCrest Smart-Audio App with plenty of screenshots can be found online. You
can find the relevant internet links in the “QR codes” chapter.
Setting up a device
If you cannot establish a connection using WPS, you can use the SilverCrest Smart-Audio App to
connect your device to the network.
Power on the device and start AP mode. The AP mode lets you configure and connect your device
to the WiFi network.
When you use it for the first time, the device starts in AP mode. Otherwise, hold the
WPS / RESET button for approx. 5 seconds to restart the device. After a brief
initialisation period (yellow and blue LEDs on simultaneously, then one LED briefly
lights up green) only the blue LED flashes slowly and the device is in AP mode.
Start the SilverCrest Smart-Audio App and select “Set up audio system”. Follow the on-screen
instructions to connect the device to your WiFi network.
After setup is finished, you can add more existing WiFi devices to the network in the same way, if
you have any.
Setting up a group
In order to create a group, you need at least two Multiroom devices in the same network.
From the overview, select the device you wish to act as the “Master” in the group and press the
button next to the device.
In the window that opens, you are shown the Multiroom devices you can add to the group. Select
the devices you wish to add to the group. Confirm your selection by checking the boxes next to the
names. You can also rename the group.
Then press “Done” or “OK”. You have successfully created a group.
Please note that a group cannot contain more than 5 devices.
Source
You can use the “Source” menu option to select the available audio sources for the selected
Multiroom system:
‐
Internet radio
‐
Spotify
‐
Music streaming
‐
Local music
