SilverCrest SMRS 35 A1
English - 11
blue LED flashes 3 times fast, followed
by a short pause
WPS mode, waiting for WPS signal from router
blue LED on
Connected to the network
green LED on
AUX mode
green and blue LEDs flashing fast
Wi-Fi connection fault
green and blue LEDs flashing slowly two
times
Maximum volume has been reached
Software update
As the product is constantly being developed, it can sometimes become necessary to update the
software on your device. This will be notified with a corresponding notice in the app.
Please perform the software update according to the app instructions.
Please note that the update may take up to 15 minutes, depending
on the Internet connection and the number of devices to be updated.
The update process:
The update starts loading. The blue and green LEDs light up for approx. 15 seconds, then the
blue LED goes out for a second and then the blue and green LEDs flash during the download
(approx. 10-30 seconds).
Then the blue LED comes on for approx. 10 to 15 seconds.
Next, the device restarts and the update is installed. This is indicated by the blue and green
LEDs flashing (approx. 1-2 minutes).
After the update is finished, the device restarts. After the reboot, it is available in the
SilverCrest Smart-Audio App again, the blue LED is now lit constantly.
Important! Please note the following:
Do not interrupt the power supply to the device while the update is running. Please wait for the
update to complete. The entire process is automatic, you don't need to do anything.
If you have any questions regarding the update process, please contact our hotline, who will be
happy to help you.
Installation recommendations and notes about the EQ settings
A carefully chosen location of the speakers is important for obtaining a good sound. Furniture,
curtains and other objects already influence the sound slightly.
You should always try to install the speakers at the height of the listener's head.
