SilverCrest SMRA 5.0 A1
112 - English
LED indicators
orange LED on
Standby mode (network connection active)
green LED on and blue LED on
Adapter is initialising
blue LED flashes slowly
AP mode, waiting for network connection
blue LED flashes 3 times fast, followed by a short
pause
WPS mode, waiting for WPS signal from router
blue LED on
Adapter on, Wi-Fi connection OK
green and blue LEDs flashing fast
Wi-Fi connection fault
green and blue LEDs flashing slowly two times
Maximum volume has been reached
Software update
As the product is constantly being developed, it can sometimes become necessary to update the software on your
device. This will be notified with a corresponding notice in the app.
Please perform the software update according to the app instructions.
Please note that the update may take up to 15 minutes, depending
on the Internet connection and the number of devices to be updated.
The update process:
The update starts loading. The blue and green LEDs light up for approx. 15 seconds, then the blue LED goes
out for a second and then the blue and green LEDs flash during the download (approx. 10-30 seconds).
Then the blue LED comes on for approx. 10 to 15 seconds.
Next, the device restarts and the update is installed. This is indicated by the blue and green LEDs flashing
(approx. 1-2 minutes).
After the update is finished, the device restarts. After the reboot, it is available in the SilverCrest Smart-Audio
App again, the blue LED is now lit constantly.
