■
80
│
GB
│
MT
SLE 200 A1
Timer function
The appliance is equipped with a timer function that can be used with either of
the programmes. Switch-off times, ranging from 1 to 12 hours, can be selected.
Once the set time has elapsed, the appliance switches off permanently.
♦
While the appliance is running, press the
button
e
repeatedly to set a
switch-off time between 1 and 12 hours. The selected switch-off time flashes
for approx. 5 seconds on the display
w
and then the current programme is
shown again. Additionally, a point appears on the right of the display
w
,
above the
symbol. This indicates that the timer function has been activated.
♦
To end the timer prematurely, press either the
button
e
repeatedly
until
appears on the display
w
or switch off the appliance with the
button
z
.
Emptying the water tank
The water tank
6
has a capacity of approx. 2.2 litres. When the water tank
6
is full, the appliance will beep for approx. 20 seconds and
will appear on the
display
w
. The dehumidification stops, the fan continues to run for approx. 3 minutes
and then switches off.
♦
Pull the water tank
6
carefully out of the appliance using the grips on the
side (see figure 1).
6
Fig. 1
♦
Tip out the water and replace the water tank
6
into the appliance. The
appliance resumes operation with the previously selected programme after
around 3 minutes.
Summary of Contents for SLE 200 A1
Page 3: ...A B C ...
