Silvercrest SKR 800 D1, Operating Instructions And Safety Instructions

Page: 42 / 154

SilverCrest SKR 800 D1
40 - English

The day display flashes and you can now turn the TIMER control [5] to set the day of the date. Press
the button [7] briefly to apply the setting.

The symbol [32] flashes on the display and you can use the TIMER control [5] to enable or disable
this function. To do this, select "ON" or "OFF and confirm by pressing the button [7]. If you have
enabled the RDS (Radio Data System) function, the date and time are synchronised automatically if
there is a good RDS signal.

The DT symbol [33] flashes on the display and you can use the TIMER control [5] to enable or disable
this function. To do this, select "ON" or "OFF and confirm by pressing the button [7]. If the DT
(Display Timeout) function is enabled, the display [1] is dimmed to the lowest level between 23:00
and 05:00.
8.18 Storage when not in use
If you are not using the kitchen radio for an extended period of time, unplug it from the mains and
remove any batteries.
Store the kitchen radio in a dry, cool place.
9. Troubleshooting
The kitchen radio does not work.

Make sure the mains plug is properly inserted into a mains socket.
The display [1] remains dark.

Check whether the display [1] has dimmed automatically to the lowest level. Press any button to do
this.

Check whether the display [1] has been dimmed manually to the lowest level. Press the DIMMER
button [11] to toggle between the display brightness levels (dim, medium, bright).

You can check the display as follows: In standby mode, press and hold the
button [6] for
approx. 2 seconds. All display items light up for about 5 seconds.
Poor radio reception

Unwind the wire antenna [18] fully and/or move it to a different position.

Start a new station search.
Device switched on but no sound

Check the volume setting.

Check whether the correct operating mode (Radio / AUX) has been selected.

In AUX mode, check the volume setting on your playback device.

In AUX mode, check if the audio cable [B] is properly connected to the AUX connector [2] of the
kitchen radio and to the audio output of your playback device.
Date and time do not synchronise automatically.

The RDS signal is too weak. Set the date and time manually.