Silvercrest SKM 500 B1, Operating Instructions Manual

Page: 13 / 131

10
SKM 500 B1
GB
6) Slide the pusher
1
into the fi lling shaft
2
.
7) Insert the plug into the mains power socket.
Blender
NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Place the blender onto the motor block
o
in a central position so that the
arrow on the holder with mixing knife
9
is pointing at the symbol .
2) Turn the blender until the arrow is pointing at the symbol .
3) Fit the lid
6
to the blender
7
so that the lip of the lid
6
is exactly in line with
the handle of the blender
7
(Fig. 3). Ensure that the lip is positioned exactly at
the side next to the handle towards which the guide at the handle opens.
Rotate the lid
6
clockwise so that the locking mechanism on the lid
6
en-
gages in the guide at the handle of the blender
7
(Fig. 4). Press the lip down
a little way to ensure that the locking mechanism has engaged in the slot.
Fig. 3 Fig. 4
4) Fit the blender closure
5
to the lid
6
of the blender so that the plastic tabs
slide into the guides in the lid
6
. Then rotate the closure
5
by 90°, so that
it is fi rmly attached.
5) Insert the plug into the mains power socket.
IB_103418_SKM500B1_BG_GR.indb 10 16.10.14 10:03