Silvercrest SKD 2300 D4, Operating Instructions Manual

Page: 18 / 44

GB │ IE │ NI │ 15 ■ SKD 2300 D4
Troubleshooting
This section contains important information about fault identification and rectification.
WARNING
Observe the following safety information to avoid hazards and property damage:
► Repairs to electrical appliances should only be carried out by specialists trained
by the manufacturer. Improper repairs can cause considerable risks to users
and damage to the appliance.
Fault causes and rectification
The following table will help you to identify and rectify minor malfunctions:
Malfunction Possible cause Remedy
The appliance
will not switch
on.
The plug is not connected.
Put the power plug into the
socket.
The mains power socket is not
supplying power.
Check the house mains fuse.
The appliance
switches itself
off automati-
cally.
The overheating protection has
been triggered.
Allow the appliance to cool
down.
Clean the appliance.
The selected temperature has
been reached.
The appliance switches itself
back on automatically as
soon as the room tempera-
ture falls.
Select a higher target tempe-
rature.
NOTE
► If you are unable to resolve the problem by taking any of the aforementioned
steps, please contact the Customer Service department.