SKBL 56 A1
■
12
│
US-EN
If you connect a 3.5 mm
(0 .14")
jack cable to one of the speakers during
Bluetooth
®
operation, the speaker will automatically switch to playback
from the connected device.
Automatic switch-off
If the 3 .5-mm (0 .14") jack socket is not in use or their is no playback via
Bluetooth
®
, the speakers automatically switch off after about 10 minutes .
The operating/charging LED will go out and you will hear a beep .
Any existing
Bluetooth
®
connection will be terminated .
♦
Press and hold the button for about 4 seconds to turn a speaker
back on .
The automatic turn-off function does not work while the speakers are charging.
Troubleshooting
If you cannot pair the speakers to a compatible
Bluetooth
®
music device,
proceed as follows:
♦
Make sure that the
Bluetooth
®
function is activated on the music device .
When a device is connected via a 3 .5-mm (0 .14") jack cable, the
Bluetooth
®
function is deactivated .
♦
Ensure that the speaker is turned on .
♦
If you use several music devices, ensure that any previous connection is
disconnected (see section
Function of the buttons for music playback
) .
There may be a previously paired device within range .
♦
Make sure that the speakers are no more than 32 ft from the
Bluetooth
®
device and each other . Make sure that there are no barriers or electronic
devices placed between them .
IB_282774_Bluetooth_SKBL56A1_LB9.indb 12
16.01.17 11:28
