SKBL 56 A1
■
10
│
US-EN
The next time you turn on the speakers, they will connect automatically to each
other. To unpair the speakers, proceed as follows.
If you want to connect the speaker to another
Bluetooth
®
device, you must
first unpair the current
Bluetooth
®
device. To do this, hold down the
button and the button
(
)
of the affected speaker for
about 2 seconds until you hear a beep. Alternatively, you can terminate the
connection on your
Bluetooth
®
device. In this case, you will also hear
a beep.
Function of the buttons for music playback
Button
Function
►
Press briefly to play/pause the music .
►
Press and hold until you hear a beep to turn the speaker
on or off . The device must be paired with your
Bluetooth
®
device again before you can reuse it .
Button
Function
/
►
Press briefly to increase the volume . When you reach the
maximum volume, you will hear a brief tone .
►
Press and hold for approx . 2 seconds to jump to the next
track .
/
►
Press briefly to decrease the volume . When you reach the
minimum volume (mute), you will hear a short beep .
►
Press and hold for 2 seconds to jump back to beginning of
the current track . Within 2 seconds, press and hold again
for 2 seconds to jump to the previous track .
&
/
(
)
►
Press and hold both buttons at the same time for about
2 seconds to activate or deactivate the
Bluetooth
®
connection . When the
Bluetooth
®
function is activated,
the two speakers connect automatically (
) .
Telephone functions
■
If you use a smartphone as your
Bluetooth
®
playback device, the audio
playback will be paused when there is an incoming call .
■
Acceptance/termination of the call can be carried out via the smartphone
or the speaker . The sound is played on the device speaker .
IB_282774_Bluetooth_SKBL56A1_LB9.indb 10
16.01.17 11:27
