Silvercrest SIRD 14 B1, User Manual

Page: 35 / 146

SilverCrest SIRD 14 B1
English - 33
[DRC] This allows you to reduce the dynamic range between low and high-volume sounds. The
following options are available:

DRC high

DRC low

DRC off
Rotate the NAVIGATE knob [4] to select and press the NAVIGATE knob [4] to confirm. The
selected setting is marked with a .
[Station order] You can sort the station list using the following options:

Alphanumeric (sort from A to Z)

Ensemble (sort by ensemble channel number)

Valid (sort from high to low signal strength)
Rotate the NAVIGATE knob [4] to select and press the NAVIGATE knob [4] to confirm. The
selected setting is marked with a .
Receiving FM Radio
Use this operating mode to listen to FM radio stations.
Selecting a station
Proceed as follows to select a station:

Extract the telescopic antenna [12] fully.

Rotate the NAVIGATE knob [4] to tune to the frequency you want manually. To search for a
station automatically, press the NAVIGATE knob [4]. You can stop the station search by
pressing the NAVIGATE knob [4] again. The display [2] indicates the current frequency in
MHz. As soon as a station has detected, the display [2] shows its name instead of the
frequency. If required, move the telescopic antenna into a different position or move the device
to optimise reception of the current station.
Depending on the direction of rotation of the NAVIGATE knob [4] the station search
starts increasing or decreasing the frequency.