Silvercrest SHSS 16 A1, Operating Instructions Manual

Page: 48 / 64

SHSS 16 A1 GB
│
MT
│
45 ■
5) To replace the rotary brush 0 , first push the
broad end onto the drive shaft so that the
rotary brush
0 hooks into place.
6) Then, push the other end into the mount so that
the rotary brush 0 sits straight in the floor
nozzle.
7) Replace the cover plate and fasten it firmly
into place by pushing the catch towards the
symbol (fig. 4).
Fig. 4
Storage
■ When you are not using the appliance, place
it on the cradle
#
.
■ Place the accessories on the accessory
holders
/ / :
–
Place the crevice tool
%
and the upholstery
nozzle
+
into the holders
/
/ .
–
Place the brush attachment 1 onto the
upper part of the crevice tool
%
.
■ Store the appliance in a dust-free and dry
location.
Troubleshooting
The appliance is not working.
■ The battery is not charged.
♦ Connect the appliance to the charger
,
.
■ The appliance is defective.
♦ Contact the Customer Service department.
The appliance is running but hardly
sucking up any dirt.
■ The battery is not sufficiently charged.
♦ Connect the appliance to the charger
,
.
■ The dirt container is full.
♦ Empty the dirt container .
■ The HEPA filter is blocked.
♦ Clean the HEPA filter .
The appliance will not charge.
■ The charger
,
is not correctly connected to
the socket/mains plug.
♦ Check the connections of the charger
,
.
■ The charger , is defective.
♦ Contact the Customer Service department.