Silvercrest SHK 360 A1, Operation And Safety Notes Translation Of The Original Instructions

Page: 30 / 69

GB/IE/NI 30
Safety instructions / Before use / Using the appliance
This product is only suitable
for well insulated spaces or
occasional use.
z
Before use
„ „
Open the packaging and carefully lift the
appliance out of the packaging.
„ „
Remove the packaging material and
the packaging and transport safety
appliances (if available).
„ „
Check whether all the items are
included.
„ „
Check the appliance and accessories for
transport damages.
„ „
Store the packaging material and
documents until the expiration of the
guarantee period, if possible.
„ „
Carefully read through these instructions
before using the appliance and keep
them for future reference. If the
appliance is purchased by a future user,
they must be given the operating
instructions along with the appliance.
„ „
This appliance must only be used
according to its main purpose for which
it was designed, e.g. to heat living
spaces. Any other use is considered
incorrect and therefore dangerous.
The manufacturer shall assume no
responsibility for failures/malfunctions
caused by incorrect and improper use.
The warranty shall become invalid
if these safety instructions are not
observed.
„ „
This appliance must not be used near a
bathtub, shower stall or swimming pool.
„ „
The appliance must only be used in the
upright position on a stable surface.
Use on an unstable surface (e.g. bed)
is not permitted.
ATTENTION! Prior to the initial
start-up, check whether the voltage
available corresponds to the voltage
indicated on the type plate. During the
initial start-up or after a longer service
life or stoppage, it may result in a
temporary development of odours.
DANGER! When appliances are
used it is important to comply with
certain safety precautions in order to
prevent any injuries and damages.
Therefore, carefully read through these
operating instructions/safety instructions.
Keep them safe so that you have access
to this information at all times. If the
appliance is given to another person,
please ensure that these operating
instructions/safety instructions are
included. We shall assume no liability
for accidents or damages that occur
as a result of failing to follow these
instructions and the safety instructions.
z
Using the appliance
z
Switch on / switch off
1. Insert the mains plug
11
into the plug
socket.
2. Press the On/Off button 1 to switch on
the appliance.
3. Turn the thermostat turn-switch
5 in the
clockwise direction until the maximum
setting is reached.
4. Press the standby button
2 in order to set
the product to standby and the standby
(function) indicator light
3 will light up.
5. Press the fan switch
10
in order to
activate the fan without the heating
function. The appliance switches to the
fan mode and the fan indicator light
4
lights up.