Silvercrest SFMT 2.4 A1, Operating Instructions And Safety Instructions

Page: 12 / 126

SilverCrest SFMT 2.4 A1
10 - English
WARNING! Maintenance/cleaning
Repairs are required when this device has been damaged in any way, for
example when liquid has entered the product, when the product has been
exposed to rain or moisture, when the product does not work normally or if
the product has been dropped. If smoke, unusual noises or smells are
noticed, power off the device immediately and remove the batteries. If this
occurs, do not continue to use the device and have it checked out by an
expert. All repair work must be carried out by qualified personnel. Never
open the housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use aggressive liquids.
WARNING! Make sure that:
- the device is not exposed to direct heat sources (e.g. radiators)
- no direct sunlight or bright artificial light reaches the device
- contact with water sprays or drops and corrosive liquids is avoided and
the device is never operated near water; in particular the device may
never be immersed in liquids (do not place any objects containing
liquids, such as vases or drinks, on or near the device)
- the device is never placed near magnetic fields (e.g. speakers)
- no naked flames (e.g. burning candles) are placed on or near the device
- no foreign bodies can penetrate into the device
- the device is not exposed to any extreme temperature fluctuations as this
can cause moisture through condensation and cause short-circuits. If the
device has been exposed to strong temperature variations, wait for it to
reach the ambient temperature before switching it on (about 2 hours).
- the device should not be subjected to excessive shocks and vibrations
Operating environment
Position the device on a stable, flat surface and do not place any objects on
the device. The device is not designed for use in environments with high