SFA 40 A2
■
14
│
GB
│
IE
│
NI
Auto power function
The auto power function enables you to set the device so that it
switches back on automatically and connects to a known mobile
phone as soon as the built-in vibration sensor is activated.
If the device has lost its connection to a mobile phone, e.g. due to
excessive distance, and it has not been restored within 10 minutes,
it will switch to auto power function (if this has been previously acti-
vated). If there is a vibration, e.g. caused by opening the car door,
the device switches back on and auto matically attempts to connect
to known mobile phones for about 2 minutes. If there is no known
mobile phone in range, the device switches back to auto power func-
tion. The auto power function also works if you have switched the
device off manually.
NOTE
►
It is however possible that the automatic connection cannot be
made depending on the mobile phone used. If this happens, press
the multifunction button
to restore the connection.
►
With some mobile phones, the connection must also be
confirmed on the mobile phone itself. Please also refer to the
operating instructions for the respective mobile phone.
►
You can only switch on the auto power function if the hands-
free set is not in pairing mode.
►
If you do not have your phone with you during your journey,
we recommend switching off the auto power function. In this
way you can prevent the device from switching itself on and off
due to vehicle movements.
♦
Press and hold the mute button for about 2 seconds to
turn on the auto power function. The operating LED briefly
lights up green.
Summary of Contents for SFA 40 A2
Page 3: ......
