Silvercrest SFA 4.1 D1, Operating Instructions And Safety Instructions

Page: 41 / 186

SilverCrest SFA 4.1 D1
English - 39
Charge the lithium ion battery fully before its first use. Insert the USB plug of the car charger adapter provided into the
USB charging socket (5) of the hands-free kit. Then insert the car charger adapter into an appropriate in-car socket.
The LED of the car charger adapter lights up green. The multi-function button (8) lights up green while charging. A full
charge cycle takes approximately 3 hours. The multi-function button (8) will go out when charging is complete.
Disconnect the car charger adapter from the in-car socket and the hands-free kit.
WARNING! Charge the battery only when the engine is running to save your vehicle’s battery.
The battery can also be charged on a PC or using an external mains adapter. A connecting cable with appropriate
micro-USB plug is required for this.
9.2 Switching the hands-free kit on/off
Press the multi-function button (8) for approx. 3 seconds until you hear a series of beeps and buttons 1, 2, 7 and 8
flash briefly several times. The hands-free kit is now ready for use. If a connected device is in range, buttons 1, 2, 7
and 8 will flash blue briefly once approx. every three seconds. If no connected device is in range, buttons 1, 2, 7 and
8 will flash blue briefly twice approx. every three seconds.
If no known device is in range for approx. 10 minutes, a beep will sound and the hands-free kit will switch
automatically from standby mode to energy saving mode. Buttons 1, 2, 7 and 8 do not flash in energy saving mode.